KH-35 Supplier, Distributor, Supply, Supplies Yamada Lubrication Equipment ~ KT Machinery & Bearings Sdn Bhd

KT Machinery & Bearings
Sdn Bhd
37, Jalan SB Indah 1/2A,
Taman Sungai Besi Indah,
43300 Seri Kembangan,
Selangor, Malaysia.

+603-8943 6339

enquiries@kt.com.my

KH-35

79 / 124

operation· Drive system		Product No	Model	Grease filling method					・ Nozzle ・ Micro-use availability
operation· Drive system		Product No	Model	Hand-packed	Cartridge cylinder type	420mL Bellows Cartridge	210mL Bellows Cartridge	85mL Bellows Cartridge	・ Nozzle ・ Micro-use availability
manual	Lever type	854629	KH-120	○	×	×	×	○	○
		854627	KH-35	○	×	×	○	×	○
		854628	KH-32	○	×	×	×	×	○
		854655	KH-16	○	×	×	×	○	○
		854669S	KH-500S	○	×	○	×	×	○

* Click on the model number “KH-120 / 35/32/16” in the table above to display the dimension drawing.

* SPK-2C / SPK-20C / SPK-2C-1M micro hose cannot be attached to KH-16.
Various nozzles and micro hoses can be used.

Product No	Model	full length (mm)	mass (kg)	Oil tank diameter (mm)	capacity (Hand-packed) (g)	Cartridge (g)	Available Grease (NLGI)		Discharge volume / Stroke (g)	Maximum pressure (MPa)
Product No	Model	full length (mm)	mass (kg)	Oil tank diameter (mm)	capacity (Hand-packed) (g)	Cartridge (g)	Hand-packed	cartridge	Discharge volume / Stroke (g)	Maximum pressure (MPa)
854629	KH-120	232	0.51	38	130	80	No.1	No.0 ~ 2	0.55	20
854627	KH-35	290	1.11	59.6	380	200	No.1	No.0 ~ 2	0.9	twenty five
854628	KH-32	412	1.27	59.6	180	-	No.1	-	1.5	twenty five
854655	KH-16	241	0.44	38	130	80	No.1	No. 1-2	0.4	Ten
854669S	KH-500S	368	1.30	59.6	500	400	No.1	No.0 ~ 2	0.9	50

* KSP-120 / 35/32 come with HSP-1 nozzle as standard.
* CNP-2 is included as standard with KH-16.

* CNP-2 and SPK-3C are included with KH-500S.
* The maximum pressure indicated is the pressure when using the chuck nozzle (CNP-2).
* The total length and mass do not include the nozzle.
* When using grease by hand, depending on temperature conditions, etc.
It may not be used at low viscosity below NLGI1.

Grease set (when hand-clogged)

How to remove and replace the nozzle

When removing or replacing the included nozzle or genuine option (hose / nozzle)
Remove the nozzle mounting bracket (main body) with a wrench and install a new nozzle.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*

KH-35

Quick Links

Recent Post

Contact